AR-BC260 SIMULATION 9 - 7
44
1
Used to set enable/disable of
correction operations in the image
forming (process) section.
Setting
Process
(Photoconductor,
developing, transfer,
cleaning)
Operation
2
Black image density sensor
adjustment
Adjustment
Process (Transfer)
Operation
4
Image forming section correction,
image density sensor adjustment
conditions setup
Setting
Process
(Photoconductor,
development, transfer)
Picture quality
6
Used to forcibly execute the image
forming section correction (high
density process correction) (process
correction).
Operation test/check
Process
(Photoconductor,
developing, transfer,
cleaning)
Operation
9
Used to check the data related to the
image forming section correction (the
corrected main charger grid voltage
in each print mode, the developing
bias voltage, etc.). (Used to check
that correction is performed normally
or not.)
Adjustment/Setting/
Operation data output,
check (display, print)
Process
(Photoconductor,
developing, transfer,
cleaning)
Data
Operation data
(Machine
conditions)
12
Used to check the sampling toner
image patch density data in the
image forming section correction
(high-density correction) (process
correction). This simulation allows to
check if the correction operation is
performed normally.)
Adjustment/Setting/
Operation data output,
check (display, print)
Process
(Photoconductor,
developing, transfer,
cleaning)
Data
Operation data
(Machine
conditions)
13
Color image density sensor
adjustment (Adjustment by the
adjustment jig)
Adjustment
Process (Transfer)
14
Used to monitor the output level of
the fusing temperature sensor, the
machine temperature sensor, and
the humidity sensor.
Adjustment/Setting/
Operation data output,
check (display, print)
Others
21
Used to store color balance
adjustment data. (Half tone image
correction initial setting) (After
execution of color balance
adjustment with SIM 46-21, this
simulation must be executed.)
Setting
Picture quality
22
Used to check each color toner patch
image density UITU in half tone
image forming section correction
(process correction). (This simulation
allows to check if correction
operation is performed normally.)
Adjustment/Setting/
Operation data output,
check (display, print)
Process
(Photoconductor,
developing, transfer,
cleaning)
Data
Operation data
(Machine
conditions)
24
Used to check the half tone
correction result. (This simulation
allows to check if correction is
executed properly or not.)
Adjustment/Setting/
Operation data output,
check (display, print)
Process
(Photoconductor,
developing, transfer,
cleaning)
Data
Operation data
(Machine
conditions)
25
Setting the half tone correction
conditions.
Adjustment/Setting/
Operation data output,
check (display, print)
Process
(Photoconductor,
developing, transfer,
cleaning)
Data
Operation data
(Machine
conditions)
26
Used to execute half tone correction
compulsorily.
Adjustment
Process
(Photoconductor,
developing, transfer,
cleaning)
Picture quality
27
Used to clear the half tone correction
data and set to the default level.
Data clear
Process
(Photoconductor,
developing, transfer,
cleaning)
Data
36
Color image density sensor and
black image density sensor
adjustment (simple adjustment)
Adjustment
Process (Transfer)
46
1
Used to adjust the copy density of
each color copy mode in the low-
density area. The copy densities of
all colors in the low-density areas are
changed.
Adjustment
Process
(Photoconductor,
developing, transfer,
cleaning)
Picture quality
Density
2
Used to adjust the copy density of
the low-density area in each
monochrome copy mode. The copy
density of the low-density area is
changed.
Adjustment
Process
(Photoconductor,
developing, transfer,
cleaning)
Picture quality
Density
4
Used to adjust the image density
(color mode) in the network scan
mode.
Adjustment
Scanner (reading)
Picture quality
Density
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
