Sharp AR-235 Operation Manual Download

Page: 16 / 158

PART NAMES AND FUNCTIONS

S
T

ARTE

Operation panel

COPY key and indicator (p. 76, 84)

Press to select the COPY mode.
Press and hold during standby or during warm-
up to display the total output count and the
quantity of toner remaining.

Mode keys and indicators

Use these keys when relevant optional compo-
nents are installed.

Display

Displays information to assist the operator.

BACK key

Press to return the display to the previous
screen.

Information (

) key (p. 66)

Press to display the detailed description when

is displayed in the upper right-hand corner of

the display.

JOB STATUS key (p. 19)

Press to check the settings of selected functions
or the status of reserved output jobs.

OK key

Press to confirm the selected setting or entered
data.

Copy quantity display

Displays the specified copy quantity during
standby and displays the copy countdown as
copies are made.

Numeric keys

Use to select the desired copy quantity.

INTERRUPT (

) key and indicator (p. 39)

Interrupts a copy run.

CLEAR ALL (CA) key (p. 17)

Clears all selected settings and returns the
copier to the initial settings.

START (

) key and indicator

Copying is possible when the indicator is on.
Press to start copying.

EXPOSURE key (p. 29)

Use to select the exposure modes: AUTO,
TEXT, TEXT/PHOTO, PHOTO or SUPER
PHOTO.

PAPER SELECT key (p. 24)

Use to manually select a paper tray.

COPY RATIO key (p. 33)

Press to select a reduction or enlargement copy
ratio.

The indications of the
operation panel may
differ depending on the
country and the region.

00EX.book 14 ページ２００１年５月２５日金曜日午前１０時４９分

Summary of Contents for AR-235































































































































































Search results

Summary of Contents for AR-235

Reviews:

Related manuals for AR-235

Brands by name

Popular brands

Sharp AR-235, Operation Manual

Search results

Summary of Contents for AR-235

Reviews:

Related manuals for AR-235

Brands by name

Popular brands