SINGLE PASS FEEDER (AR-SP4)/REVERSING SINGLE PASS FEEDER (AR-RP3)
94
OP
T
IO
N
AL E
Q
UIP
M
E
N
T
Specifications
NOTE:
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units and there may be some
deviations from these values in individual units.
Acceptable originals
Up to 30 originals ranging from A5 to A3 (5-1/2" x 8-1/2" to 11" x 17") and from 56 to 90
g
/m
2
(15 lbs. to
23 lbs.) can be used.
The total aggregate thickness must not exceed 4 mm (5/32").
NOTES:
●
Be sure to remove any staples or paper clips from the originals.
●
Before placing curled or wavy originals into the document feeder tray, be sure to flatten them. If
not, original misfeeds may result.
●
For best feeding of originals which have binding holes punched into them, insert them so that
the holes are positioned to the right or along the original guides. In this case the settings for
margin shift may need to be changed. See page 45.
Unacceptable originals
The following types of paper cannot be used as originals:
●
Special papers including transparency film, photographs, and tracing paper
●
Damaged or crumpled originals
●
Paper with multiple punched holes (paper with two or three holes can be used)
●
5-1/2" x 8-1/2" size originals cannot be used in the 2-sided to 1-sided or 2-sided to 2-sided mode.
Acceptable originals
Weight
56 to 90
g
/m
2
(15 to 23 lbs.)
Size
A5 to A3 (5-1/2" x 8-1/2"* to 11" x 17")
* 5-1/2" x 8-1/2" size originals cannot be used in the duplex
copy mode.
Capacity
Up to 30 sheets provided the total aggregate thickness does
not exceed 4 mm (5/32")
Power supply
Drawn from the copier
Detectable original
sizes
A5, A4, A4R, B4, A3 (5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14",
11" x 17")
Weight
SPF
Approx. 5.0 k
g
(11.1 lbs.)
RSPF
Approx. 5.4 k
g
(11.9 lbs.)
Dimensions
583 mm (W) x 435 mm (D) x 133 mm (H)
(22-61/64" (W) x 17-1/8" (D) x 5-1/4" (H))
00EX.book 94 ページ 2001年5月25日 金曜日 午前10時49分
Summary of Contents for AR-235
Page 24: ...22 GETTING STARTED ...
Page 156: ...154 ...
Page 158: ...AR 235 AR 275 SHARP CORPORATION PRINTED IN CHINA 2001F KS TINSE0541QSZZ T ...