Sharp AR-235, Operation Manual

Page: 26 / 158

24
MA
KING COP
IE
S
NORMAL COPYING
The basic copying procedure is described below.
●
Image loss (max. 4 mm (5/32")) can occur at the leading and trailing edges of the copies. Also image
loss (max. 3 mm (1/8")) can occur along the other edges of the copies.
NOTE:
If the copier has been programmed in the auditing mode, enter a 5-digit account number.
See page 20.
1 Place an original face down on the platen glass and align it with the
original size scale.
●
The detected original size will be indicated in the display.
NOTE:
If the original size cannot be detected, the original size can be entered as follows. Press the
SPECIAL FUNCTION key. Use the and keys to select "ORIG. SIZE ENTER" and then press
the OK key. Use the and key to select "AB" or "INCH" and use the and keys to select the
desired original size. Press the OK key.
2
Close the platen cover.
●
Paper matching the size of the original will be automatically selected when the auto
paper select function has been enabled. To copy onto paper of a different size, press the
PAPER SELECT key.
●
Paper of the different orientation may be selected if the auto paper select or auto image
function has been selected. In this case, the image of the original will be rotated and
copied. See page 35.
★
KEY OPERATOR The auto paper select function can be disabled using a key operator
program. If this function is disabled, use the PAPER SELECT key to select the desired
paper tray. See page 134.
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
ORIG. SIZE ENTER
AB
A3
B4
A4
00EX.book 24 ページ ２００１年５月２５日 金曜日 午前１０時４９分