FUEL
Fuel system
4-9
6P23H11
Reducing the fuel pressure
WARNING
Always reduce the fuel pressure in the
high-pressure fuel line before servicing
the line or the vapor separator. If the fuel
pressure is not released, pressurized fuel
may spray out.
1.
Remove the fuse holder cover
1
, and
then remove the high-pressure fuel pump
fuse (15 A)
2
.
2.
Start the engine.
NOTE:
•
If the engine starts, it will stall after a few
seconds.
•
If the engine does not start, crank the
engine 2 or 3 times.
3.
After the engine stalls, crank the engine
2 or 3 times.
4.
Turn the engine start switch to OFF.
Disconnecting the quick connector
WARNING
If the quick connector is removed sud-
denly, pressurized fuel could spray out.
Be sure to reduce the fuel pressure before
removing the quick connector.
1.
Reduce the fuel pressure.
2.
Wrap the quick connector with a rag, and
then rotate the quick connector tab
1
to
the stopper position
a
.
CAUTION:
•
Do not rotate the quick connector tab
1
past the stopper position
a
, otherwise it
could be damaged.
•
When the fuel hose is disconnected,
quickly remove the retainer
2
from the
quick connector, otherwise the retainer
could be lost.
3.
Disconnect the quick connector
3
from
the fuel rail or vapor separator directly.
S6P24270
1
2
a
PORT
STBD
Summary of Contents for Blue Whale 250 EFI
