BRKT
Bracket unit
7-11
6P23H11
2.
Remove the oil pan
4
from the upper
exhaust guide
5
and lower exhaust
guide
6
.
3.
Remove the oil strainer
7
from the lower
exhaust guide
6
.
NOTE:
Clean dirt from the removed parts and check
the parts for cracks or corrosion.
Checking the oil strainer
1.
Check the oil strainer. Clean if there is
dirt and residue.
Assembling the oil pan
1.
Install the dowels, new gasket
1
and
lower exhaust guide
2
onto the upper
exhaust guide
3
.
2.
Install the new gasket, oil strainer
4
and
bolts, and then tighten the bolts to the
specified torque.
3.
Install the new gasket, oil pan
5
, and
then tighten the bolts
6
temporary.
4.
Install the new gasket, exhaust manifold
7
, rubber seal, and then tighten the bolts
8
temporary.
5.
Tighten the exhaust manifold bolts
8
,
then the oil pan bolts
6
to the specified
torques.
T
R
.
.
Oil strainer bolt:
10 N
·
m (1.0 kgf
·
m, 7.4 ft
·
lb)
Summary of Contents for Blue Whale 250 EFI
