6P23H11
6-4
1
2
3
4
5
6
7
8
9
Removing the lower unit
1.
Drain the gear oil.
2.
Set the gear shift to the neutral position,
and place a block of wood between the
anti-cavitation plate and propeller to keep
the propeller from turning, and then
remove the propeller nut and propeller.
WARNING
•
Do not hold the propeller with your
hands when loosening or tightening it.
•
Be sure to disconnect the battery cables
from the battery and the clip from the
engine stop lanyard switch.
•
Put a block of wood between the anti-
cavitation plate and propeller to keep
the propeller from turning.
•
When removing the lower unit with the
power unit installed, be sure to suspend
the outboard motor. If the outboard
motor is not suspended it can fall sud-
denly and result in severe injury.
3.
Mark the trim tab
1
at the area shown,
and then remove it.
4.
Loosen the bolts (nuts), and then remove
the lower unit from the upper case.
È
U-transom model
Lower unit (regular rotation model)
Summary of Contents for Blue Whale 250 EFI
