SELVA MARINE Blue Whale 250 EFI, Service Manual

Page: 89 / 377

6P23H11
4-6
1
2
3
4
5
6
7
8
9
4. Check that the remote control lever is in
the fully closed position of the throttle,
and then check the output voltage of TPS
1 and the throttle valve opening angle.
CAUTION:
Do not loosen the throttle stop screw nut,
and do not turn the throttle stop screw.
NOTE:
• Check the TPS after the engine has been
warmed up.
• When checking the TPS, do not start the
engine.
• The actual TPS output voltage and throttle
valve opening angle may vary according to
environmental conditions and engine tem-
perature.
5. Shift the remote control lever to the fully
open position and hold it.
6. Check the output voltage of TPS 2 and
the throttle valve opening angle.
7. Operate the remote control lever, and
check that the output voltages of TPS 1
and TPS 2 change continuously.
S6P24150
S6P24440
Output voltage of TPS 1 with the
remote control lever at the fully
closed position:
at 20 °C (68 °F):
0.750 V (reference data)
Throttle valve opening angle with the
remote control lever at the fully
closed position:
at 20 °C (68 °F):
0.5–7.0° (reference data)
TPS 2 output voltage with the remote
control lever at the fully open
position:
at 20 °C (68 °F):
4.550 V
Throttle valve opening angle with the
remote control lever at the fully open
position:
Above 80° (reference data)
S6P24160
Hose routing