SELVA MARINE Blue Whale 250 EFI, Service Manual

Page: 134 / 377

POWR
Power unit
5-21
6P23H11
7. Disconnect the quick connectors
8
and
remove the high-pressure fuel hose
assembly (vapor separator-to-starboard
fuel rail).
NOTE:
• Be sure to reduce the fuel pressure before
removing the quick connector. To reduce
the fuel pressure, see Chapter 4,
“ Reduc-
ing the fuel pressure. ”
• To disconnect the quick connector, see
Chapter 4,
“ Disconnecting the quick con-
nector. ”
8. Remove the plastic ties
9
and clips
0
,
and then pull up the wiring harness.
9. Remove the bolts and wiring harness
guide
A
.
Removing the power unit
NOTE:
It is recommended to loosen the flywheel
magnet nut before removing the power unit to
improve working efficiency.
1. Remove the flywheel magnet cover.
2. Remove the retaining plate
1
, grommet
2
, and cable holder
3
, and then discon-
nect the remote control cables.
3. Remove the starboard intake manifold.
NOTE:
See the exploded diagram (4-12).
4. Remove the clamps
4
and caps
5
, and
then disconnect the PTT motor lead
6
.
5. Disconnect the vapor gas hose
7
from
the starboard top cowling lock.
S6P25410
8
8
S6P25420
0
9
0
9
0
A
S6P25135E
4
S6P25300
5
6