SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 28 / 176
2.3 How to set the parameters
▶
The following setting data input key is displayed and the necessary data can be input when the
is
clicked at the basic setting button in the above [Table 2-1]
▶
The error message (“LIMIT ERROR”) is appeared on the input data display window with error sound
(”Beep”) when the data out of the setting range is input.
①
Input key for setting the number
②
Input key for setting the pattern experiment name and DI error name.
☞
Refer to the [19. DI function and operation setting] for DI error name input key.
③
Input key for time signal setting.
④
Input key for SEG alarm setting.
Summary of Contents for Temp 2000 M
Page 1: ...Instruction Manual...
