SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 74 / 176
6.3 Setting the measure data (PV) graph saving
▶
It is a screen to set the display range and sampling time in [3.2.3 Stationary operation the 2
nd
operation
screen] and [3.3.3 Program operation the 2
nd
operation screen].
①
It sets the PV graph saving period.
☞
It cannot be saved during PV graph saving.
☞
About 25 days of saving is available when the sampling time is set 1 second in saving into the internal
memory.
②
It sets the Y/N of the data saving into SD CARD.
☞
Auto : It saves the data automatically in link with Operation/Stop.
☞
Manual: It saves the data manually by the save key on the operation the 2
nd
screen.
③
It sets the saving media where the data to be saved.
☞
The saved data stored into the internal memory is erased when the power is OFF.
Table 6-2. Graph & Save the 3
rd
screen parameter
Parameter
Setting range
Unit
Initial data
Sampling time
00.01 ~ 99.59 (Min, Sec)
ABS
00.01
Save motion setting
Auto, Manual
ABS
Auto
Save media
Memory, SD card, both of them
ABS
Both of them
①
②
[Fig. 6-8] Graph & Save setting the 3
rd
screen
③
Summary of Contents for Temp 2000 M
Page 1: ...Instruction Manual...
