SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 29 / 176
⑤
User tag input key
⑥
Display in case out of the setting range
Touch key lock release
▶
Input after in OFF (Lock release state) of “Key lock” because the setting data is not input when
the “Key lock” is “ON (Locked state)
A.
Refer to the [4. Operation motion setting] for details of setting.
2.3.1 Effectiveness of the setting button and setting data
▶
This product is designed as follows when the setting data input button is pressed or to check the
effectiveness of the input setting data by sound.
☞
“Beep” : When the basic setting button is pressed or the setting data is input normally
☞
“Beep and beep”: When the input data by the setting data input key is out of the input range.
Cautions in manipulation
▶
Do not press with the sharp thing (Pencil and etc) or excessive power when the basic setting
button and setting data input key are pressed. It may become the reason for the malfunction
or damage on the touch panel.
Summary of Contents for Temp 2000 M
Page 1: ...Instruction Manual...
