SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 137 / 176
19. DI function and operation
19.1 DI operation setting
19.1.1 DI function and operation setting the 1
st
screen
▶
Display type can be set for “photo” only when SD CARD option is selected.
①
It sets display type when DI error occurs.
☞
character : refer to the [Fig. 19-12 Screen whose DI error display type is character]
☞
Photo : refer to the [Fig. 19-13 Screen whose DI error display type is photo]
-
Only if internal memory has [Fig. File (BMP), photo is displayed when DI errors occurs.
②
It sets the time of buzzer alarm in case of DI occurrence.
☞
Even if it is set for “0”, buzzer is alarmed in case of DI error occurrence.
☞
If DI 1, 2, 3 Operation type is set for Run/Stop, Hold and Step, buzzer is not alarmed.
However it is set for error, buzzer is alarmed.
③
Delay time of DI sensing is set.
☞
When the physical DI contact is occurred, it operates with DI input when the contact point is ON
during the contact point setting time.
④
It moves to next screen next or previous screen.
Table 19-1. DI function and operation setting the 1
st
screen parameter
Parameter
Setting range
Unit
Initial data
Display type
character, photo
ABS
character
Buzzer duration time
0.00 ~ 99.59 (MIN.SEC)
ABS
00.01
DI sensing delay time
0.00 ~ 99.59 (MIN.SEC)
ABS
00.01
①
②
③
④
[Fig. 19-1] DI function and action setting the 1
st
screen
Summary of Contents for Temp 2000 M
Page 1: ...Instruction Manual...
