SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 49 / 176
4. Operation related motion setting
4.1 Operation method setting
▶
It is a screen for the additional function of the general device and the additional installation in stationary
operation.
①
Either of the pattern or stationary operation can be selected for setting.
②
The recovery motion can be set in case of blackout.
☞
Stop : It is a motion to return to the operation stop state when the power is returned after blackout
in operation state.
☞
Restart : It is a motion to start the operation from the beginning after blackout in operation state.
☞
Continuous : It is a motion to return to the operation state before the blackout after blackout in
operation state.
③
The control is stabilized in case of external problem is created.
☞
Non-operation: The fuzzy function is not used.
☞
Operation: It uses the fuzzy function and the overshoot is inhibited.
④
It automatically increases or decreases with the set ratio in case of setting data change. (It is applied
only in stationary operation.)
⑤
The operation is terminated when the set time is coincided with the set data of total operation
processing time in [3.2.2 Stationary operation the 1
st
operation screen] (It is available in stationary
operation only.)
⑥
The key pad to input the password is display when the main button is pressed in the operation screen
at the setting of the main button control is set.
☞
[Fig. 4-2] Reference
⑦
When
(key lock) button is pressed, every parameter is not available.
☞
The screen movement and key lock release is available.
①
②
③
④
⑤
[Fig. 4-1] Screen for setting operation related motion
⑦
⑥
Summary of Contents for Temp 2000 M
Page 1: ...Instruction Manual...
