SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 65 / 176
①
The time signal is ON after the setting time from the corresponding segment starting point till the
delayed time.
☞
However, the time sign is not ON when the delay time is bigger than corresponding segment time.
②
The time signal operated in ON by the delayed time in the corresponding segment is ON only for the
setting time in the operation time.
☞
However, when [Delay time+Motion time] is bigger than corresponding segment time, the time signal
is ON during corresponding segment operation and it does not make influence on the next segment.
Table 5-4. Time signal parameter
Parameter
Setting range
Unit
Initial data
Delay time
000.00.00(OFF) ~999.59.59(Hr. Min,
Sec)
ABS
000.00.00
Operation time
000.00.00(OFF) ~999.59.59(Hr. Min,
Sec)
ABS
000.00.00
[Fig. 5-8] Time signal setting the 3
rd
screen
①
②
[Fig. 5-9] Time signal setting the 4
th
screen
Summary of Contents for Temp 2000 M
Page 1: ...Instruction Manual...
