SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 37 / 176
3.3 Program operation
3.3.1 Program operation the 1
st
still screen
▶
Select the operation method of “Pattern” in [4. Operation related motion setting].
▶
When “Operation state screen” is selected in [3.1 Main screen], it converts to “Stationary operation the
1
st
still screen.”
▶
Refer to the [5.1 Program pattern setting] for pattern setting.
▶
It converts to [Fig. 3-13 Program operation the 1
st
operation screen] when
(Operation) button at
the bottom is pressed in the [Fig. 3-11 Program the 1
st
still screen].
▶
When the “Pattern No.” is touched in the screen, the input key is displayed for pattern number input.
Table 3-2. Program still screen parameter
Parameter
Setting range
Unit
Initial data
Pattern
number
1~40
ABS
1
▶
It is not operated when the program is not input on the pattern number displayed on the
screen.
☞
Refer to [5.1 Program pattern setting].
[Fig. 3-11] Program operation the 1
st
still screen -1
[Fig. 3-12] Pattern number input
Summary of Contents for Temp 2000 M
Page 1: ...Instruction Manual...
