Samwon Tech Temp 2000 M, Instruction Manual

Page: 143 / 181

SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 139 / 176
▶ Operation type for respective DI signals can be set.
▶ 8 types of operation can be set, DI1∼ DI16 are set.
① DI1 Operation type is set.
☞ Error: When DI1 error occurs, “Character” or “Picture” is displayed according to display type.
☞ When error is created, it is displayed in ‘Letter’ or ‘Photo” depending on the display pattern.
☞ Run/Stop: When DI1 error occurs, run terminates in the point where error is cleared after run.
② DI2 Operation type is set.
☞ Error: When DI2 error occurs, “Character” or “Picture” is displayed according to display type.
☞ Hold: When DI2 error occurs, screen of current run is held, and Hold is cleared in the point where
error is cleared.
- It can be only done in case of programmed run.
③ DI3 Operation type is set.
☞ Error: When DI3 error occurs, “Character” or “Picture” is displayed according to display type.
☞ Step: When DI3 error occurs, it is compulsorily moved from current segment in progress to next
segment.
- It can be only done in case of programmed run.
④ DI4∼8 Operation type is set.
☞ Error : When DI4~8 error occurs, “Character” or “Picture” is displayed according to display type.
☞ Pattern: When DI4~8 error occurs, it is compulsorily moved to corresponding pattern according to
“Pattern selection by DI”.
- It can be only done in case of programmed run.
Table 19-3. DI function and operation setting the 3
rd
screen parameter
Parameter Setting range Unit Initial data
DI1 Operation type Error, Run/Stop ABS Error
DI2 Operation type Error, Hold ABS Error
DI3 Operation type Error, Step ABS Error
DI4∼8 Operation type Error, Pattern selection ABS Error
DI9 Operation type Error, Run/Stop ABS Error
DI10 Operation type Error, Hold ABS Error
DI11 Operation type Error, Step ABS Error
DI12∼16 Operation type Error, Pattern selection ABS Error
[Fig. 19-3] DI function and action setting the 3
rd
screen
①
③
②
④