SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 63 / 176
▶
When the copy and deletion are made by wrong input of the pattern No., the message like “It is the
parameter setting mistake.” Is displayed at the bottom of the screen.
Table 5-3. File editing parameter
Parameter
Setting range
Unit
Initial data
Pattern No.
1~80
ABS
0
Start pattern
0~80
ABS
0
Copy
End Pattern
0~80
ABS
0
Copy
Non-use, Use
ABS
Non-use
Start pattern
0~80
ABS
0
Selective
deletion
End Pattern
0~80
ABS
0
SEL.DEL
Non-use, Use
ABS
Non-use
ALL.DEL
Non-use, Use
ABS
Non-use
▶
Refer to Table 5-4 for message expression.
Table 5-4 Message expression
Contents of message
Explanation
“No stored at the selected pattern.”
It is displayed to copy when nothing is stored into the pattern
No.
“The copy is completed on the selected
pattern.”
It is displayed when the selected pattern copy is completed.
“The deletion of the selected pattern was
completed.”
It is displayed when the selected pattern is deleted
completely.
“The deletion of every pattern is
completed.”
It is displayed when every pattern is completely deleted.
“The pattern to be copies is being used.”
It is displayed when the pattern is being used.
[Fig. 5-5] File editing screen-2
Summary of Contents for Temp 2000 M
Page 1: ...Instruction Manual...
