Samwon Tech Temp 2000 M, Instruction Manual

Page: 50 / 181

SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 46 / 176
▶ Tuning point calculation in zone type shall be made as follows.
① Tuning point : 1
☞ PID1 range auto tuning is performed.
Boundary data1 – Lower limit range
－ PID1 auto tuning setting data=
Lower limit
range +
2
② Tuning point : 2
☞ PID2 range auto tuning is performed.
Boundary data2 – Boundary data1
－ PID2 auto tuning setting data= Boundary data1 +
2
③ Tuning point : 3
☞ PID3 range auto tuning is performed.
Boundary data3 – Boundary data2
－ PID3 auto tuning setting data= Boundary data2 +
2
④ Tuning point : 4
☞ PID4 range auto tuning is performed.
Boundary data4 – Boundary data3
－ PID4 auto tuning setting data= Boundary data3 +
2
⑤ Tuning point : 5
☞ PID5 range auto tuning is performed.
Upper limit range – Boundary data4
－ PID5 auto tuning setting data= Boundary data4 +
2
⑥ Tuning point : 6
☞ PID6 range auto tuning is performed.
Upper limit range – Lower limit range
­ PID6 auto tuning setting data=
Lower limit range
+
2
⑦ Tuning point : Auto
☞ The a1 in PID1 ~ 6 range is processed sequentially.
☞ The auto tunned PID data is saved into PID1 ~ 6 range.
Boundary data1 – Lower limit range
－ PID1 auto tuning setting data= Lower limit range +
2
Boundary data2 – Boundary data1
－ PID2 auto tuning setting data= Boundary data1 +
2
Boundary data3 – Boundary data2
－ PID3 auto tuning setting data= Boundary data2 +
2
Boundary data4 – Boundary data3
－ PID4 auto tuning setting data= Boundary data3 +
2
Upper limit range – Boundary data4
－ PID5 auto tuning setting data= Boundary data4 +
2
Upper limit range – Lower limit range
­ PID6 auto tuning setting data= Lower limit range +
2