SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 38 / 176
3.3.2 Program operation the 1
st
still screen
▶
It is the screen for measured data, setting data, control output quantity and operation state.
▶
The pattern No. cannot be set during operation.
①
It displays the current operation status.
②
It displays current pattern No. and SEG No.
③
It displays the current measured data.
④
It displays the current measured data of the sub channel.
⑤
It displays current program pattern No. and SEG No.
⑥
It displays the pattern repetitions state.
☞
[Pattern repetition frequency : 000/000] The front digits show the repletion frequency and the rear
digits show the set repetition frequency.
⑦
The No. of PID zone is expressed which is being adopted currently.
⑧
It displays the processing time and setting time of the segments which are being progressed.
☞
[SEG time : 000H00M00S/000H00M00S] The time in the front means the segment processing time
and the time in the back means the setting time in the [5.1 Program pattern setting].
⑨
It means current date/time and the LCD screen blinks when it is pressed.
☞
The red lamp is ON when the date/time button is pressed on the operation still screen.
☞
The green lamp is ON when the date/time button is pressed on the operation screen.
⑩
It moves to the [Fig. 3-1 Main screen].
☞
The key pad to input the password is displayed at the main button restriction setting.
⑪
It moves from the current screen to the other screen.
⑫
The partial repetition state is displayed.
☞
[SEG repetition frequency : 00/00] The front digits show the repeated processing frequency and the
rear digits display the set repetition frequency.
⑬
The program operation processing time is displayed.
②
⑤
③
④
⑦
⑨
⑩
⑪
①
[Fig. 3-13] Program operation the 1
st
still screen -2
⑫
⑬
⑥
⑧
Summary of Contents for Temp 2000 M
Page 1: ...Instruction Manual...
