SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 132 / 176
18. PID Group
18.1 PID application scope setting
18.1.1 PID application scope setting the 1
st
screen
▶
This is made up of 6 PIDs.
▶
Light green color is displayed in corresponding PIP number during stationary (FIX) and programmed run.
▶
Upper limit range, Lower limit range: displays zone for all span.
☞
It is only for reading, so it is impossible to change.
▶
Limit.HYS: sets hysteresis width when selects PID group in zone PID.
▶
deviation.PID : sets deviation when selects deviation PID
▶
Boundary data1-4: sets boundary data dividing zone PID for all span.
▶
Tuning reference value: sets auto tuning point applied in auto tuning.
①
Pushing the number leads to corresponding PID group setting screen.
☞
Pushing
button leads to PID group setting screen.
②
It moves the page up/down on the current screen.
①
[Fig. 18-1] PID application scope setting the 1
st
screen
②
Summary of Contents for Temp 2000 M
Page 1: ...Instruction Manual...
