SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 32 / 176
3.2 Stationary (FIX) operation
3.2.1 Stationary operation the 1
st
still scree
▶
Select the operation method in “Stationary” in [4. Operation related motion setting].
▶
When “Operation state screen” is selected in [3.1 Main screen], it converts to “Stationary operation the
1
st
still screen.”
▶
The following is the screen for 6 channel of sub channel.
▶
When the ‘Setting data” is touched for setting data input, the input key is displayed.
▶
When the “Setting” is touched in the sub channel, the input key is displayed.
Table 3-1. Stationary still screen parameter
Parameter
Setting range
Unit
Initial data
Setting data (SP)
EU(0.0 ~ 100.0%)
EU
EU(0.0%)
※
EU : Sensor input data range
☞
Refer to [Engineering Unit]
[Fig. 3-2] Stationary operation the 1
st
still screen
[Fig 3-3] Setting data input screen
Summary of Contents for Temp 2000 M
Page 1: ...Instruction Manual...
