English Englis_
English
_85
SYSTEM MANAGEMENT
READER POINT SETTING [EDIT]
(This is not available in SAMS Pro Lite.)
There is no Add and Delete function for Reader Point Setting. Reader points are confi gured automatically at the time of
device setting automatically, provided with default values appropriately for the device operations. Editing the reader point
setting is provided for changes and further refi ning of the settings.
From the upper menu, select [System Management] > [Reader Point Setting].
Select an item to change using [Quick Search] in the tool bar.
Available reader points are listed in the [Select Reader Point] list on the right pane of the screen.
Reader points displayed may differ from device’s type that is registered in the Device Setting.
You can set output signal’s duration for each item listed in the [Select Reader Point]. For example, you can
specify the signal duration for which output for how many seconds long whenever the Reader 1 OK event
occurs on the reader connected to the controller. In general, Output 1 is set to 03 seconds of activation when
the Reader 1 OK event occurs.
Output operation confi guration each reader points may differ from devices. For further details, refer to the controller’s
product documentation.
Select a reader point to be edited from the [Select Reader Point] list, and confi gure the output time settings.
Click Save <
> in the tool bar.
Click Transmit button <
> in the toolbar to send the confi guration to the device.
To confi rm the data transmission and its result, run the [Monitoring] > [Integrated Monitoring] from the toolbar
before clicking the transmit button.
The data transmission result of each item will be displayed in the [Auditing Log] window of the integrated monitoring
screen.
J
1.
2.
3.
J
4.
J
5.
6.
7.
J
