54_
logging in & initial setup
logging in & initial setup
CARD HOLDER MANAGEMENT
You can register an ID and information on each card holder.
From the upper menu, select [Access Control] > [Card Holder Management].
Enter the [Employee ID].
Enter the [Name].
Select a [Company].
Select a [Department].
If there is no company or department name, add in [Operation Management] > [Company Setting] and
[Operation Management] > [Department Setting]. And then set company and department information in
[Operation Management] > [Company-Department Setting].
Add the photo of the user.
You can use bmp, jpg, jpeg, gif, png and wmf fi les. Since too big image fi le may cause delay in registration and
display in monitoring screen, it is recommended to use smaller image fi le. It is recommended to use image fi les in
jpg format. It is recommended to use image fi les of less than 100KB.
1.
2.
3.
4.
5.
J
6.
J
