English Englis_
English
_105
DEVICE MANAGEMENT
From the upper menu, select [Device Management] > [Master Card Management].
Click Add <
> in the tool bar.
Select a [Company].
Enter the [Card Number]. (For SSA-S30XX and SSA-S210x, you can set the Master Card as the PIN number.
To activate the PIN number, please select the [PIN number] checkbox.)
Enter the [Password].
Enter the [Master Card].
Click [Fingerprint Registration] button for fi ngerprint registration.
For fi ngerprint registration, SSA-X500 fi ngerprint scanner must be installed. If installed with the fi ngerprint scanner,
connect the scanner to a USB port of the computer and install the SSA-X500 device driver. For device driver
installation, refer to the program installation section of this manual.
For the master card in general, various authorization methods for regular cards are not supported (depending on devices).
For entering the master mode, SSA-S30xx series products use RF+PFingerprint authorization. For SSA-R20x0,
R20x1 series products, reading the Master Card enters the master mode.
1.
2.
3.
4.
5.
6.
7.
J
