60_
system management
system management
This is a step to confi gure the device settings. Scan for controllers to communicate with via the previously
specifi ed loop and select one to register. Specify the address range for the controllers to scan for. By default,
the automatic scan will check the address range of between 0 and 1. Click [Auto Search Controller] to scan for
controllers within the specifi ed range. The controllers found will be displayed in the [Searched Controller List].
Select a controller to use in the controller list and drag and drop it to the [Registered Controller List] on the
bottom. Or use the triangle or the inverted triangle shaped button to register or delete it. Select the name
column of each controller in the [Registered Controller List] and rename it as necessary. Click [Next] to move to
the next step.
Confi rm the registered information. Check whether the controller setting is properly done, and click [Save] to
fi nish the setting.
Device Setting Wizard – Loop Setting (Network Communication)
4.
5.
