44_
logging in & initial setup
logging in & initial setup
SITE SETTING
This will guide you through connection between PC that has installed SMAS Pro and communication server; for
SAMS Pro Lite, you can select a site to monitor from a list of the specifi ed sites.
Up to 10 sites can be added to the SAMS Pro, and each site requires its own Communication Server.
From the upper menu, select [System Management] > [Site Setting].
When adding a site, use Quick Find instead of Add for editing site information, since a site has default setting
values. Click [Quick Search] on the top left corner and select the default value Default Site.
If a site has been newly added, Site Setting of SAMS Communication Server Pro should be done again.
With SAMS Pro Lite, you can not register a new site or delete an existing one.
Edit [Site].
[Communication Server IP]: Enter the IP address of the computer that is installed with SAMS Communication
Server Pro.
Check the port. It is recommended to use the default 51008.
1.
2.
J
3.
4.
5.
