Roland SP-300, Service Manual Book

Page: 188 / 242

3 Replacement of Main Parts
3-41
3
5
6
7
Remove the ENCODER SCALE by removing the PLATE
fixing the ENCODER SCALE at its right end and the
SPRING on its left end.
8
Remove the SPRING PLATE from the ENCODER SCALE
and fix it to the ENCODER SCALE where there is no black
dot written on it.
Put the ENCODER SCALE in between the ENCODER
PLATE and the GUIDE RAIL.
Then, fix the right end with the PLATE and hook up the
SPRING on the left end.
Make sure that the ENCODER SCALE is in place.
Make sure not to make scratches or put
grease on the ENCODER SCALE when fixing
it.
Do not loosen or tinghten the screws fixing the
ENCODER PLATE.
ENCODER SCALE
PLATE
SPRING
SPRING PLATE
BLACK DOT
ENCODER PLATE
ENCODER SCALE
PLATE
SPRING
ENCODER PLATE
Move the HEAD CARRIAGE in a whole width of the
machine.
Make sure that the ENCODER SCALE doesn't make
contact with the ENCODER MODULE and also
E N C O D E R S C A L E i s b e t w e e n t h e s l i t o f t h e
ENCODER MODULE.