4-36
4 Adjustment
4
TOOL / CROP MARK SENSOR ADJUSTMENT will be
done automatically.
11
8
Setup the Vinyl Sheet (note : Vinyl should be black and
the backing should be white.) on the Machine.
Turn on the sub power switch while pressing [ ], [ ] and
[ ] keys to enter the SERVICE MODE.
Select [AUTO] under the [CROP-TOOL ADJ.] menu.
Crop Mark will be cut when the [ENTER] key is pressed.
9
While the Vinyl is still set on the Machine, peel off the
Crop Mark being cut when the message shown in the
right figure is displayed on the LCD.
Then, press the [ENTER] key.
10
[AUTOMATIC ADJUSTMENT]
[ ], [ ], [ ] + POWER ON
[ MENU ] key
SERVICE MENU
Menu
SERVICE MENU
CROP-TOOL ADJ.
[ENTER]
SERVICE MENU
MENU
CROP-TOOL ADJ.
AUTO
CROP-TOOL ADJ.
REMOVE CROPMARK
[ENTER]
CROP-TOOL ADJ.
COMPLETED
Summary of Contents for SP-300
