4-29
4 Adjustment
4
11
Carry out the CUT DOWN POSITION INITIALIZE by
pressing [ENTER] key. When CUT DOWN POSITION
INITIALIZE is completed, print the service report.
14
DETECTING..
INITIALIZE
COMPLETED
13
12
TOOL CARRIAGE will be separated from the HEAD CARRIAGE.
Move the TOOL CARRIAGE with your hand until it makes
full contact with the LEFT FRAME and make the cutter down.
Confirm the CAPPING UNIT is capped at correct
position, press [ENTER] Key again.
After the LIMIT POSITION INITIALIZE is completed,
the message appears as shown in the figure.
DETECTING..
SETTING UP
CUTTER DOWN POS
PUMP COVER
Fix the PUMP COVER.
Summary of Contents for SP-300
