Roland SP-300 Service Manual Book Download

Page: 151 / 242

3 Replacement of Main Parts

3-4

Remove the SPRING, and remove the 3 screws fixing

the HEAD in order as shown in the figure.

Then, pull the HEAD towards the front and pull it up to

remove it.

SPRING

Disconnect the 2 flexible cables from the HEAD.

Remove the HEAD BOARD COVER (the transparent

cover).

Remove the DAMPER PLATE and remove the 2 INK

DAMPERs from the HEAD which will be replaced.

DAMPER PLATE

Do not hold both sides of the INK DAMPER so

hard. It could break.

Be sure to remove and fix the INK DAMPER

with the HEAD BOARD COVER fixed. It

prevents the ink from dropping on the HEAD

BOARD.

Summary of Contents for SP-300



















































































































































































































































Search results

Summary of Contents for SP-300

Reviews:

Related manuals for SP-300

Brands by name

Popular brands

Roland SP-300, Service Manual Book

Search results

Summary of Contents for SP-300

Reviews:

Related manuals for SP-300

Brands by name

Popular brands