• Maintenance Cover Sensor
--> It detects whether the Maintenance Cover is opened or closed.
• Ink Cartridge Sensor
--> It detects whether the Ink Cartridge is installed or not.
• Ink Empty Sensor
--> It detects whether the Ink Cartridge is empty or not.
• Sheet Load Sensor
--> It detects whether the Sheet Loading Lever is up or down and
makes the machine start the media setup.
• Thermostat (Heater)
--> It stops power supply if the Heater temperature is over the upper
limit.
• Thermistor (Heater)
--> It takes the temperature around the Heater.
Sensors
Sensors
Summary of Contents for SP-300
