Roland SP-300 Service Manual Book Download

Page: 241 / 242

5-1

5 Supplemental Information

5-1 SENSOR MAP

FRONT PAPER SENSOR

It detects the front edge of the media.

LIMIT SENSOR

It detects the origin of the Carriage Moving Direction

and the limit.

FRONT COVER SENSOR

It detects whether the Front Cover is opened

or closed.

REAR PAPER SENSOR

It detects the rear edge of the media and also

whether the media is set or not.

(Rear of the machine)

(Front View of the machine)

I/S COVER SENSOR

It detects whether the I/S Cover is opened or

closed.

HEAD LOCK SENSOR

It detects wheter the HEAD CARRIAGE is at locking

position or not.

MAINTENANCE COVER SENSOR

It detects whether the Maintenance Cover is

opened or closed.

SHEET LOAD SENSOR

It detects whether the Sheet Loading Lever

is UP or DOWN.

INK EMPTY SENSOR

It detects whether the Ink Cartridge is empty or not.

INK CARTRIDGE SENSOR

It detects whether the Ink Cartridge is installed or not.

Summary of Contents for SP-300



















































































































































































































































Search results

Summary of Contents for SP-300

Reviews:

Related manuals for SP-300

Brands by name

Popular brands

Roland SP-300, Service Manual Book

Search results

Summary of Contents for SP-300

Reviews:

Related manuals for SP-300

Brands by name

Popular brands