3 Replacement of Main Parts
3-20
3
6
8
5
7
Disconnect the connector of the MOTOR cable.
Remove the screws fixing the FLANGE and remove
the MOTOR together with the FLANGE.
Remove the Motor from the Frange and fix the new
Motor to the Frange.
Be careful with the fixing direction of the
Frange.
FLANGE
CONNECTOR
Rotate the Motor 90 degree and remove it downward.
FLANGE
SCREW
Summary of Contents for SP-300
