Rohde & Schwarz NRPM OTA Power Measurement Solution, Manual

Page: 103 / 229

Network and remote operation
R&S
®
NRPM
103 Mannual 1425.8663.02 ─ 08
Table 9-5: Meaning of bits used in the questionable status register
Bit No. Meaning
0 to 2 Not used
3 Questionable power status register summary bit
Corresponds to the summary bit of the questionable power status register.
See
Chapter 9.2.6.1, "Questionable power status register" , on page 103.
4 to 7 Not used
8 Questionable calibration status register summary bit
Corresponds to the summary bit of the questionable calibration status register.
See
Chapter 9.2.6.2, "Questionable calibration status register" , on page 104.
9 POST failure
The built-in test of the R&S NRPM carried out automatically upon power-up
has generated an error.
10 to 15 Not used
9.2.6.1 Questionable power status register
The
CONDition
register contains information whether the measured power val-
ues are questionable.
Querying the register:
●
STATus:QUEStionable:POWer:CONDition?
●
STATus:QUEStionable:POWer[:SUMMary][:EVENt]?
Table 9-6: Meaning of bits used in the questionable power status register
Bit No. Meaning
0 Not used
1 sensor module power
The measurement data of the sensor module is corrupt.
2 to 4 Not used
5 sensor module please zero
The zero correction for the sensor module is no longer correct and should be
repeated.
6 to 15 Not used
Status reporting system