Network and remote operation
R&S
®
NRPM
101
Mannual 1425.8663.02 ─ 08
PPE; bit 6 is also used - in contrast to the SRE. The IST flag is obtained by
ORing
all results together.
The PPE can be set by the
*PRE
command and read by the
*PRE?
query.
9.2.5
Device status register
Contains information on the state of the static errors.
Querying the register:
●
●
Querying the static errors:
●
Table 9-4: Meaning of bits used in the device status register
Bit No.
Meaning
0
Sum of SERR bits
The sum/combination of SERR bits 1 to 4.
1
SERR measurement not possible
2
SERR erroneous results
Static error exists; the measurement result is possibly incorrect.
3
SERR warning
A static error exists therefore the Status LED of the sensor module is blinking
slowly in red.
4
SERR critical
A critical static error exists therefore the Status LED of the sensor module is blink-
ing fast in red.
5 to 6
Not used
Status reporting system
