Rohde & Schwarz NRPM OTA Power Measurement Solution, Manual

Page: 70 / 229

Performing measurements
R&S
®
NRPM
70 Mannual 1425.8663.02 ─ 08
Unit multiples Keyboard key
micro u
nano n
Example:
To set the unit to 1 GHz, enter 1g .
For certain units, you can select a different representation, depending on the
requirements. For example, for the representation of the "Trigger Level", you can
choose Watt, dBm or dBµV. To change the unit, you must specify the desired
value together with the full new unit once.
Example:
To change the representation of a "Trigger Level" of 100
µ
W into dBm, enter
-10dbm in the "Trigger Level" field. All future entries of solely numbers represent
the value in dBm. If you enter -15 in the field, the "Trigger Level" value is set to
-15.00 dBm.
If you want to revert the value to Watt, enter 50uW . The "Trigger Level" value is
set a value of 50.00
µ
W, thus changing the unit for the further numeric entries.
7.2.2.3 Common settings
Describes common measurement settings that are available for all measurement
modes.
Access:
► In the common settings pane of the web browser-based user interface main
dialog, select the corresponding parameter.
The remote commands required to define the common settings are described
in:
●
Chapter 10.9, "Starting and ending a measurement" , on page 170
● Chapter 10.8.3, "Configuring corrections" , on page 168
Measurement applications