Remote control commands
R&S
®
NRPM
129
Mannual 1425.8663.02 ─ 08
<string_value>
can query the information to the following system parameters:
●
Manufacturer
●
Type
●
Stock Number
●
Serial
●
SW Build
●
Sensor Name
●
Technology
●
Function
●
System MinPower
●
System MaxPower
●
System MinFreq
●
System MaxFreq
●
Resolution
●
Cal. Misc.
●
Cal. Abs.
●
Cal. Temp.
●
Cal. Lin.
●
System Cal. Due Date
●
Antenna 1 Type
●
Antenna 1 Stock number
●
Antenna 1 Serial
●
Antenna 1 Cal. Due Date
●
Antenna 1 Property
●
Antenna 2 Type
●
Antenna 2 Stock num-
ber
●
Antenna 2 Serial
●
Antenna 2 Cal. Due
Date
●
Antenna 2 Property
●
Antenna 3 Type
●
Antenna 3 Stock num-
ber
●
Antenna 3 Serial
●
Antenna 3 Cal. Due
Date
●
Antenna 3 Property
●
System Uptime
If no antenna module is connected, the command returns "not present" for all
parameters of the corresponding antenna input.
Query parameters:
<item>
Usage:
Query only
SYSTem:INITialize
Sets the sensor to the standard state, i.e. the default settings for all test parame-
ters are loaded in the same way as with
. The sensor then returns a com-
plete list of all supported commands and parameters. With the command, the
remote-control software can automatically adapt to the features of different types
of sensors with different functionality.
Usage:
Event
SYSTem:LANGuage
<language>
Selects an emulation of a different command set.
Parameters:
<language>
SCPI
*RST:
SCPI
Configuring the general functions
