Network and remote operation
R&S
®
NRPM
89
Mannual 1425.8663.02 ─ 08
9
Network and remote operation
In addition to controlling an R&S
NRPM3(N) sensor module on a PC application,
you can operate and control it with an application that supports direct remote con-
trol from a remote PC.
The following sections contain product-related information on remote control of
the R&S
NRPM3(N) sensor module. The information applies to all applications
and operating modes.
For general information on remote control of Rohde
&
Schwarz products
using SCPI commands, refer to
.
9.1
Remote control interfaces and protocols
Remote control of sensor modules enables you to integrate them into custom
automatic test equipment (ATE) systems. For remote control communication
between the R&S
NRPM and the controlling host, you can use various interfaces
and protocols to establish the connection.
Depending on the sensor module model, the sensor modules support the follow-
ing interfaces:
●
R&S
NRPM3 sensor modules support USB access.
●
R&S
NRPM3N sensor modules support Ethernet or USB access.
lists the protocols you can use for the corresponding interfaces.
Remote control interfaces and protocols
