manualshive.com logo in svg

Rohde & Schwarz FSQ series, Quick Start Manual

Share
Download
Rohde & Schwarz FSQ series Quick Start Manual Download Page 93

Quick Start Guide 1313.9652.62 - 02

2.43

R&S FSQ

Preparing for Use

Operating System Properties

2.7 Operating System Properties

2.7.1 Properties Specific to Windows XP 

The instrument contains the Windows XP operating system. To ensure that the instrument
software functions properly, certain rules must be adhered to when using the operating
system.

Login 

For details refer to section 

“ Login” on page 2.39

.

Administrator ID 

The ID used by the instrument to perform auto login has administrator rights.

2.7.1.1 Windows XP Service Packs 

The Windows XP operating system on the instrument is supplied with pre-installed XP service
packs (SP2 and additional updates/fixes) that are necessary and suitable for operating the
instrument.

The drivers and programs used under Windows XP have been adapted to the instrument.
To avoid impairments to instrument function, use only the settings described in the
Operating Manual and this manual.
Only update software approved by Rohde & Schwarz may be used to modify existing
instrument software. Likewise, only programs approved by Rohde & Schwarz for use on the
instrument may be run on the instrument.

Possible impairment of the instrument functioning

The instrument is equipped with the Windows XP operating system. It is thus possible to
install commercial off-the-shelf software on the instrument. The use and installation of
commercial software may impair the instrument functions. We recommend that you only
execute programs tested by Rohde & Schwarz with regard to their compatibility to the
instrument software. The program packages that have been tested are listed in section

“ Windows XP Software Approved for the Instrument”

. 

Install only service packs approved by Rohde & Schwarz to avoid impairment of instrument
functions that could lead to the necessity to repair the instrument.
The drivers and programs used on the instrument under Windows XP have been adapted
to the instrument. Existing instrument software must only be modified with update software
released by Rohde & Schwarz. 

Summary of Contents for FSQ series






































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands