Rohde & Schwarz FSQ series, Quick Start Manual

Page: 47 / 229

Quick Start Guide 1313.9652.62 - 02 1.19
R&S FSQ Front and Rear Panel
Rear Panel Connections
Pin Signal Level Description
1 reserved for future use
2 GND 0V Ground, shielded pair 1-14, for future use
3 SDAT0_P LVDS Serial data channel 0 positive pin; carries the bits VALID, ENABLE,
MARKER_1, Reserve_1, RE_0, RE_1
4 SDAT1_P LVDS Serial data channel 1 positive pin; carries the bits RE_2, RE_3, RE_4,
RE_5, RE_6, RE_7
5 SDAT2_P LVDS Serial data channel 2 positive pin; carries the bits RE_8, RE_9, RE_10,
RE_11, RE_12, RE_13
6 CLK1_P LVDS Clock 1 positive pin; clock for transmission on LVDS link (Low Voltage
Differential Signaling)
7 S_CLK TTL reserved for future use
8 +5VD +5.0V Supply voltage (for future use)
9 SDAT3_P LVDS Serial data channel 3 positive pin; carries the bits RE_14, RE_15,
RE_16, RE_17, RE_18, RE_19
10 SDAT4_P LVDS Serial data channel 4 positive pin; carries the bits TRIGGER_1,
TRIGGER_2, MARKER_2, Reserve_2, IM_0, IM_1
11 SDAT5_P LVDS Serial data channel 5 positive pin; carries the bits IM_2, IM_3, IM_4,
IM_5, IM_6, IM_7
12 SDAT6_P LVDS Serial data channel 6 positive pin; carries the bits IM_8, IM_9, IM_10,
IM_11, IM_12, IM_13
13 SDAT7_P LVDS Serial data channel 7 positive pin; carries the bits IM_14, IM_15, IM_16,
IM_17, IM_18, IM_19
14 reserved for future use
15 SDAT0_M LVDS Serial data channel 0 negative pin
16 SDAT1_M LVDS Serial data channel 1 negative pin
17 SDAT2_M LVDS Serial data channel 2 negative pin
18 CLK1_M LVDS Clock 1 negative pin
19 DGND 0V Power ground; ground return for 5V supply voltage (for future use)
20 S_DATA TTL reserved for future use
21 SDAT3_M LVDS Serial data channel 3 negative pin
22 SDAT4_M LVDS Serial data channel 4 negative pin
23 SDAT5_M LVDS Serial data channel 5 negative pin
24 SDAT6_M LVDS Serial data channel 6 negative pin
25 SDAT7_M LVDS Serial data channel 7 negative pin
26 GND 0V LVDS ground; shielding of transmission lines and shielding of cable