manualshive.com logo in svg

Rohde & Schwarz FSQ series, Quick Start Manual

Share
Download
Rohde & Schwarz FSQ series Quick Start Manual Download Page 218

R&S FSQ

Appendix

Installing Non-Plug&Play Printers

A.8

Quick Start Guide 1313.9652.62 - 02

➢

You can change the printer name in the 

Printer Name

 field to any name you want (max. 60 

characters). However, this requires using a PC keyboard.

➢

Using the rotary knob, select 

Default Printer yes / no

.

➢

Using the arrow up/down keys, select the desired status.

➢

Confirm the entry with 

ENTER

.

The 

Printer Sharing

 dialog panel will open.

➢

Confirm the entry with 

ENTER

.

The 

Printer Sharing

 dialog panel will open.

➢

Exit the dialog panel by pressing 

ENTER

.

The 

Completing the Add Printer Wizard 

dialog panel will open.

➢

Check the displayed settings and exit the dialog panel with 

ENTER

.

The printer will be installed. If Windows finds the required driver files, the installation will be 
completed without any further queries.
If Windows cannot find the required driver files, the dialog box for entering the path for files 
will open.

➢

Using the rotary knob, select the 

Browse

 button and confirm by pressing the rotary knob.

The 

Locate File

 dialog box will open.

Summary of Contents for FSQ series






































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands