Rohde & Schwarz FSQ series, Quick Start Manual

Page: 143 / 229

Quick Start Guide 1313.9652.62 - 02 5.33
R&S FSQ Basic Measurement Examples
Storing and Loading Instrument Settings
5.6 Storing and Loading Instrument Settings
The R&S FSQ can store complete instrument settings together with instrument configurations
and measurement data internally as a data record. The data is stored on the internal harddisk
or – if selected – on a network drive, or a removable drive (e.g. a memory stick).
For more information on the harddisk usage see
“ Instrument Drive Usage” on page 2.9 .
The preset state (= Current Settings ) includes that the settings of the measurement functions,
activated limit lines and the active transducer factor are stored.
Use the ITEMS TO SAVE/RCL function to store/load traces and to store additional limit lines
and transducer factors.
5.6.1 Storing an Instrument Configuration (without Traces)
You can store an instrument configuration as follows:
➢
Press the FILE key and then the SAVE softkey.
The selection dialog box for instrument configurations will open:
➢
Enter the name of the data record to be stored (which is a digit from 0 to 9 in the simplest
case) and press
ENTER . The data record will be stored and the dialog box will close.