manualshive.com logo in svg

Rohde & Schwarz FSQ series, Quick Start Manual

Share
Download
Rohde & Schwarz FSQ series Quick Start Manual Download Page 77

Quick Start Guide 1313.9652.62 - 02

2.27

R&S FSQ

Preparing for Use

Setup

The 

TINT

 softkey activates entry of the tint for the selected graphics element. The percent 

value that is entered refers to a continuous color spectrum that ranges from red (0%) to blue 
(100%).

IEC bus command:

DISP:CMAP5:HSL <hue>,<sat>,<lum>

The 

SATURATION

 softkey activates entry of the color saturation of the selected element.

The entry value is between 0% and 100%.

IEC bus command:

DISP:CMAP5:HSL <hue>,<sat>,<lum>

The

 PREDEFINED COLORS

 softkey opens a list for selecting predefined colors for the 

screen objects:

IEC bus command:

DISP:CMAP1 ... 26:PDEF <color> 

2.4.5 Automatically Switching Off the Internal Screen

The R&S FSQ provides a feature for automatically switching off the screen after a user-
defined period of time. The background lighting will be disabled if no entries are made from
the front panel after the selected response time (key, softkey or hardkey and rotary knob).
To activate automatic switch-off:

➢

Press the 

DISP

 key.

➢

Press the 

CONFIG DISPLAY

 softkey.

➢

Press the 

DISPLAY PWR SAVE

 softkey.

The softkey will have a color background, indicating that the power save mode
is active. At the same time, the input window for the response time will open.

➢

Enter the desired response time in minutes and confirm the entry with the 

ENTER

 key.

The screen will be disabled (turn dark) after the selected period of time.

To deactivate automatic switch-off:

➢

Press the 

DISP

 key.

➢

Press the 

CONFIG DISPLAY

 softkey.

➢

Press the 

DISPLAY PWR SAVE

 softkey twice.

The color background of the softkey will disappear.
The power save mode is now switched off.

Summary of Contents for FSQ series






































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands