Rohde & Schwarz FSQ series, Quick Start Manual

Page: 78 / 229

R&S FSQ Preparing for Use
Setup
2.28 Quick Start Guide 1313.9652.62 - 02
2.4.6 File and Path Selection Using the Front Panel Keys
As of firmware version 4.3x the base system firmware supports new dialog boxes to select a
folder and/or a file, e.g. for trace export.
The following section describes the usage of the instrument's front panel keys using TRACE
EXPORT as an example.
➢
Press the TRACE key and then the NEXT softkey.
➢
Press the ASCII FILE EXPORT softkey to open the corresponding dialog box.
The focus is on the File Name field so you can directly edit the file name using the numeric
keys, the cursor keys or the BACK key.
You can also use alphanumeric characters in the file name.
➢
To enter alphanumeric characters, select the EDIT FILENAME button. Confirm the
selection with the ENTER key to open an online keyboard.
Select the characters with the rotary knob or the cursor keys and confirm with the ENTER
key.