manualshive.com logo in svg

Rohde & Schwarz FSQ series, Quick Start Manual

Share
Download
Rohde & Schwarz FSQ series Quick Start Manual Download Page 181

Quick Start Guide 1313.9652.62 - 02

6.33

R&S FSQ

LAN Interface

Manual Operation of the R&S FSQ with XP Remote Desktop

In this case, do the following:

➢

Press 

ALT

+

F4

.

The R&S FSQ firmware will be shut down, which may take a few seconds.

➢

Double-click 

R&S Analyzer Interface

.

The firmware will restart and then automatically open the 

Soft Front Panel

, i.e. the user 

interface on which all front panel controls and the rotary knob are mapped to buttons. 
After the connection is established the R&S FSQ screen is displayed in the Remote 
Desktop application window. 

You can operate all hardkeys, softkeys and hotkeys by using the mouse.
The rotary knob is simulated by means of the 

KNOB LEFT, KNOB RIGHT 

and 

KNOB 

PRESS

 buttons.

The Windows XP Start menu can be made available by expanding the Remote Desktop 
window to Full Size.

Summary of Contents for FSQ series






































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands