Rohde & Schwarz FSQ series, Quick Start Manual

Page: 76 / 229

R&S FSQ Preparing for Use
Setup
2.26 Quick Start Guide 1313.9652.62 - 02
2.4.4 Setting the Screen Colors
➢
Press the DISP key.
The DISPLAY menu will open.
➢
Press the CONFIG DISPLAY softkey.
The submenu for configuring the screen will open.
➢
The DEFAULT COLORS 1 and 2 softkeys set the default setting for brightness, tint and
color saturation of all screen objects. The color schemes are selected in such a manner that
all screen elements will be optimally visible regardless whether viewed from above or
below. In the instrument's default setting,
DEFAULT COLORS 1 is active.
IEC bus command:
DISP:CMAP:DEF1
DISP:CMAP:DEF2
The procedure for setting screen colors and brightness is as follows:
➢
Press the NEXT key.
The side menu for changing the screen colors will open.
The
SELECT OBJECT softkey activates the selection of screen elements for which the
color setting needs to be changed. Once this selection is made, the PREDEFINED
COLORS , BRIGHTNESS , TINT and SATURATION softkeys can be used to change the
overall color or the brightness, tint and color saturation of the selected element.
The BRIGHTNESS softkey activates entry of the brightness of the selected graphics
element.
The entry value is between 0% and 100%.
IEC bus command:
DISP:CMAP5:HSL <hue>,<sat>,<lum>