manualshive.com logo in svg

Rohde & Schwarz FSQ series, Quick Start Manual

Share
Download
Rohde & Schwarz FSQ series Quick Start Manual Download Page 211

Quick Start Guide 1313.9652.62 - 02

A.1

R&S FSQ

Appendix

Appendix A: Printer Interface

This appendix describes the installation procedure for local printers. You can either use a
plug&play printer (e.g. via USB) or a non-plug&play printer (e.g. via the LPT port).

You can install a local printer via manual or remote control. In the following step-by-step
instructions, the iinstallation process is described via remote desktop. Alternatively, you can
connect a mouse and keyboard for the installation instead of using the front panel. Also read
the documentation of your printer on how to install the printer.
After installation, the instrument must be configured for printing with a printer. Refer to

“ Selecting and Configuring Printers”

 for more information on how to select and configure

printers directly on the instrument.
A detailed description for installing network printers is provided in chapter 

“ Installing a

Network Printer”

.

To install printer drivers that are not preinstalled on the instrument, you
can use one of the following external devices: LAN, USB device (e.g.
memory stick or CD-ROM).

Summary of Contents for FSQ series






































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands