ROBBE TAK5-SA2-KFA-27-F1, Instruction Manual

Page: 43 / 182

43
Setup
Here you can select whether the concentrate has to be dispen-
sed proportionately to the concentrate plan or the concentrate
consumption.
Enter the concentrate amount to be dispensed by the screw--
conveyor after the dosing flap has been released. You can se-
lect „C--plan“ or „C--consumption“.
C--plan: percentage of the concentrate amount to which the
group is entitled at the present day according to the concen-
trate plan.
C--consumption: percentage of the average concentrate
amount consumed during the last three days.
With micro--identification „Mikro--Nedap“, you can set the identification range by means of
the antenna--Squelch.
Press Arrow Right to move to the next screen and set the in-
put and reading sensitivity of the antennas. The higher the
Squelch value, the lower the identification range of the anten-
nas. Potential input: 0 to 200.
Press ENTER to confirm the input.
The following table contains the Squelch values and identification ranges for the
different Responders. These Squelch values are empirical and have already been factory--
set.
Responder Squelch (Standard values) Identification range
X--Responder 0 max. 25 -- 30 cm
Ear tag--Responder 0 max. 25 -- 30 cm
The entered value is active, until you change it manually.
8.3.2 Setting the Baud Rate for PC and Concentrate Feeder
You have to set the same baud rate for the PC, as well as for the concentrate feeder. You can
choose among the following transmission speeds: 19200, 9600, 2400 or 1200 baud. The
standard value is 19200 baud. In case of electrical interference from the vicinity, it is advisa-
ble to reduce data transmission speed.
Press Arrow Up or Arrow Down to select menu „Set baud
rate“.
Press Arrow Right to go to the next screen.
Press Arrow Up or Arrow Down to select the baud rate accor-
ding to the utilized transmission speed.
5# dosing code A
C-plan^ yes
➔
➔
5# dosing code A
of C-plan^ x,x%
➔
5# antenna-Squelch
concentrate
180
5# setup
set baud rate ➔
^
5# baud rate
19200 baud ^
yes
5# baud rate
19200 baud ^
yes