ROBBE TAK5-SA2-KFA-27-F1, Instruction Manual

Page: 48 / 182

48
Setup
Mixer run time
In submenu „Mixer run time“ you can extend the standard mixing time by up to 16 seconds.
How long and whether mixer run time should be extended depends on milk powder’s solu-
bility.
Press Arrow Up or Arrow Down to select menu „Mixer run
time“.
Enter mixer run time (potential input: 0 to 16 seconds).
8.3.8 Heat Exchanger
If the automatic feeder is not equipped with a device for fully automatic heat exchanger
cleaning, in this menu you can deactivate this function as described below. The functioning
of automatic cleaning is described in chapter 15.2, page 134, „Rinsing, Heat Exchanger“.
Press Arrow Up or Arrow Down to select menu „Heat Ex-
changer“.
Press Arrow Right to move to the next screen.
Enter „no“ if the automatic feeder is not equipped with a de-
vice for fully automatic heat exchanger cleaning. Press EN-
TER to confirm the input.
Press Arrow Right to move to the next screen.
Press Arrow Up or Arrow Down to select the heat exchanger
with separate heating circuits with or without pump.
Enter „no“ if the automatic feeder is not equipped with a heat
exchanger with circulation pump. Press ENTER to confirm
the input.
8.3.9 Deactivating the Detergent Pump
If the automatic feeder is not equipped with a detergent dosing pump, you have to deactivate
it in Setup.
Press Arrow Up or Arrow Down to select menu „Detergent
Pump“.
Press Arrow Right to move to the next screen.
Enter „no“ if the automatic feeder is not equipped with a de-
tergent pump. Press ENTER to confirm the input.
mixer run time
+0 s
mixer run time
+6 s
5# setup
heat exchanger
➔
^
5#heat exchan. with
autom. clean. ? yes
5#heat exchan. with
autom. clean. ?
no
5# sep.heat circ.^
with pump ?
yes
5# sep.heat circ.^
without pump ? yes
5# setup
detergent pump ^
➔
5#detergent pump
available ? yes
➔
5#detergent pump
available ? no
➔